To set up configuration settings in the Magento panel

1. Go to the Magento Admin panel.
2. On the left navigation bar, click the MYSALE INTEGRATION menu.
   The menu appears as shown in the following figure:
   
3. Click on Configuration.
   The Configuration settings page appears as shown below:
   
4. In the right panel click on Mysale Seller/Developer Settings, the section is expanded as shown below:
   
5. Under Mysale Seller/Developer Settings, do the following steps:
   • In the Enabled list, select Yes to enable the extension features. In order to use the extension enabling it is a must.
   • In the Debug Log list, select Yes to start MySale Integration in the debug mode.
     

     It captures the log for the debugging process.

   • In the Api Token, paste the API you have fetched from the MYSALE seller panel.
   • Select the view of the store you wish to, from the next option of Select Store.
6. Scroll down and click on Mysale Product Settings, the section is expanded as shown below:
   
   • Under Mysale Product Settings, click on Mysale Price and Attribute Settings. The menu is expanded as shown below:
     
   • Under Mysale Price and Attribute Settings, do the following steps:
     • In Product Price select one of the following options:
       Note: These settings make the admin independent of keeping the price of their products dynamic on Mysale without making any alteration to the product price in Magento.
       • Default Magento Price: As the name suggests, when selected makes no change in price.
       • Increase by Fixed Price: If selected, then the Modify by Fix Price field appears.
         Enter the exact price and the change will get reflected on the Mysale product.
         For Example,
         Magento Price = 100
         Select Increase By Fixed Price option
         Enter Price = 20
         100 + 20 = 120
         Thus, Mysale Product Price = 120
       • Increase by Fixed Percentage: If selected, then the Modify by Percentage Price field appears. Enter the numeric value to increase the price of the Mysale product price by the entered value % of Magento price
         For Example,
         Magento price + 5% of Magento price.
         Magento Price = 100
         Select Increase By Fixed Percentage option
         Enter Percentage = 5
         100 + 5% of 100 = 100 + 5 = 105
         Thus, Mysale Product Price = 105
       • Decrease by Fixed Price: If selected, then the Modify by Fix Price field appears the same as in the increase section.
         Enter the value and the change is done.
         For Example,
         Magento Price = 100
         Select Decrease By Fixed Price option
         Enter Price = 20
         100 – 20 = 80
         Thus, Mysale Product Price = 80
       • Decrease by Fixed Percentage: If selected, then the Modify by Percentage Price field appears.
         Enter the numeric value to decrease the price of the Mysale product price by the entered value % of Magento price.
         For Example,
         Magento price – 5% of Magento price.
         Magento Price = 100
         Select Decrease By Fixed Percentage option
         Enter Percentage = 5
         100 – 5% of 100 = 100 – 5 = 95
         Thus, Mysale Product Price = 95
     • In the Parent Values In Case Of Configurable Product, choose the Attribute values from the list that will be fetched from the configurable product.
   • Now click on the Mysale Inventory Settings, the section is expanded as shown below:
     
     
   • Under Mysale Inventory Settings do the following steps:
     • In the Set Inventory on Basis of Threshold list, select Enable to send the inventory based on the threshold.
       Note: Only when the admin selects Enable, the other fields appear.
     • In the Inventory Threshold Value box, enter the value which you consider to be the minimum for your inventory.
     • In the Send Inventory for Lesser Than Threshold Case box, enter the value that needs to be visible on Mysale in case your inventory is lesser than the threshold value that you have set in the earlier parameter.
     • In the Send Inventory for Greater Than Threshold Case box, enter the value that needs to be visible on Mysale in case your inventory is more than the threshold value that you have set.
       For Example:
       Suppose you have set the threshold value of a product to be 500. You have set the greater than the threshold value to say 600 and the lesser than the threshold value to be 300.
       Now you have 530 of that product in the inventory, then the number visible on Mysale would be 600. Suppose you sold 33 products and now the value is decreased to be 497 which is below the threshold. The value that will now appear on Mysale will be 300.
     • In Buffer Qty, enter the buffer quantity in – or +. This setting will override if the buffer attribute is set at the product level. It will apply to the final qty of the product after applying the above setting.
     • In Buffer Percentage, it is applied with Magento Quantity. The quantity entered here will only be sent on ebay from the Magento store.
       
     • In Mysale Product buffer Attribute, select the products level buffer which will override the general buffer.
   • Now click on the Mysale Product Upload Settings, the menu is expanded as shown below:
     
   • Under Mysale Product Upload Settings, do the following steps:
     • In Mysale Attribute Id, products that have this Attribute and its value are 1 those products will be displayed in the Mysale Product grid.
7. Now scroll down and click on the Mysale Order Settings, the section is expanded as shown below:
   
8. Under Mysale Order Settings, do the following steps:
   • In the Mysale Order Id Prefix box, enter the text as a prefix for Mysale Increment ID.
     Note: Mysale Order Id Prefix can be a combination of numbers, alphabets, or special characters. This is for your own recognition since the orders from the Mysale marketplace will have the same prefix & will be easy to analyze. So make sure to mark them as per your ease.
   • In Auto Invoice Creation, select Enable if you want to create the invoice for the orders automatically.
   • In Import Order on Status, select the status for which the orders will be imported.
   • In Auto Acknowledge, select Yes if you want to automatically import the orders.
   • In Failed Order Notification Email, enter the email id on which you want to receive the notifications for the failed orders.
   • The Carrier Mapping setting is related to the shipment of orders. The Magento carriers are different from the Mysale carriers hence here you map the Magento carriers with the Mysale carriers for the Shipment.
   • In Max Shipment Expected Days, select the maximum days from the menu in which the shipment of the order will be done.
   • In Cancellation Text, enter the text that will be sent in the cancellation request along with the order id.
9. Scroll down and click on Mysale Cron Settings, the section is expanded as shown below:
   
10. Under Mysale Cron Settings do the following steps:
    • In the Order Cron, select Enable if you want to fetch the orders. Order Crons are used to fetch waiting for shipment orders. Based on the combination of three order settings- Order Status, Fetch Shipped Order, and Fetch Orders No. Of. Days the orders are automatically fetched if this cron is enabled.
    • In Order Cron Expression, select the duration at which you want the orders cron to run and fetch the orders.
    • In Order Import Per Request, select the importing request for the orders from the list.
    • In Inventory Cron,  the recent changes in the inventory/price attributes are updated on Mysale if you Enable this cron.
    • In Inventory Price Updating Expression, select the duration at which you want the inventory and price to update.
    • In Product Update Cron, select Enable if you want the products to be updated automatically through crons.
    • In Product Update Expression, select the duration which you wat the product update cron to run.
    • In Order Shipment Cron, select Enable to sync the status of the order automatically through the crons.
    • In All Orders Shipment Cron Expression, select the duration at which you want the order shipment status to be synced.
    • In Checking of Buffer Attribute,  if you select Enable the cron will check if any changes are made to the selected product attribute from the inventory section.
    • In the Checking of Buffer attribute, select the duration at which the buffer attributes will be checked automatically.
11. Click on the Save Config button to save the settings
    The configuration settings will be saved.